FOR USE WITH COUNTER-CLOCKWISE TURNING TRIMMERS ONLY!!
WARNING! Read and understand operators manual before using BRUSH DAWG. Failure to follow operating instructions could result in death or serious injury.
- Your BRUSH DAWG® head comes filled with line and ready to use.
- Start string trimmer, with the trimmer in the air, not on the ground, with trimmer at around ¼ throttle bump head on hard surface until line is cut by the line cutter on your string trimmer guard or is 2-3” beyond the blade. Continually bump head to keep string longer than the blade. Always keep both lines the same length as to keep your head in balance.
- When trimming around solid structures such as fences, sidewalks, siding etc…. only let the string line get close to the structure, damage to your trimmer, BRUSH DAWG® head and self may occur if you allow the metal blade to touch.
- For grass and weeds, always use the appropriate engine speed to take down the weeds or grass, when getting into brush do not run the trimmer wide open, slow the speed down and push the head into the brush, the string line will bend back and the blade will cut the brush. Never attempt to cut any woody plant larger that 3/4”. It may be necessary to use a sweeping action with your trimmer on when getting into heavy brush, allowing your trimmer to gain momentum before cutting.