INSTALLATION INSTRUCTIONS

warning

16m

warningicons

FOR USE WITH COUNTER-CLOCKWISE TURNING TRIMMERS ONLY!!

counterclockwise

WARNING! Read and understand operators manual before using BRUSH DAWG®. Failure to follow operating instructions could result in death or serious injury.

  • BEFORE USE, CONSULT YOUR OWNERS MANUAL TO MAKE SURE YOUR TRIMMER IS CAPABLE OF USING A METAL BRUSH BLADE. IF NOT, YOU WILL BE USING AT YOUR OWN RISK AND POSSIBLE TRIMMER DAMAGE MAY OCCUR.
  • Remove old head off of string trimmer.  There is typically a slot or hole to insert a small screwdriver or allen wrench, this will hold the shaft from turning.  Turn the head in the direction that the string trimmer turns, from above this should be counter clockwise, or to your left.
  • WARNING;  ALWAYS USE GLOVES WHEN HANDLING THE BRUSH DAWG® TRIMMER HEAD.
  • All studs and bushing are left hand threads. (tighten to the left or counter clockwise)
  • After removing the head, inspect head and output shaft on trimmer to determine if you need a bushing only or if you need a bushing and stud.  If you need only a bushing (your current string trimmer head has female threads)  try each bushing on the end of your trimmer gear box until you find the correct one, then screw that bushing into the BRUSH DAWG® head and tighten using the tool provided.  If your old head has a stud coming out of it then you will need to match the threads of one of the studs in the kit by threading them into the gear box on the end of your trimmer, then thread it into a matching bushing and then screw the combination into the BRUSH DAWG® head.
  • Thread the new BRUSH DAWG® head on to your trimmer.  Make sure that it fits tight, and that there is not a gap between the BRUSH DAWG® head and the gear box bushing. If there is use an appropriate washer to fill the gap.  Stihl trimmers generally require the nylon bushing supplied in the kit. This bushing goes between the BRUSH DAWG® head and the trimmer gear box.

OPERATION MANUAL (pdf)

COMBINED MANUFACTURING

18451 Centaur Rd.
Wildwood, MO 63005
sales@ezpourspout.com

Brought to you by the manufacturers of:

ezplogofooter